Click image to view full size image
2.00-6.00mm CNC XD-560 five axis compression spring machine 100pcs/min
2.00-6.00mm XD-560 five axis spring coiling machine
Technical Parameter:
| Model: | XD-660 |
| Wire diameter: | Φ2.006.00 mm |
| Axes: | 5 axes |
| Maximum Outside Diameter: | 90 mm |
| Maximum Feeding Length: | unlimited |
| Maximum Manufacture Speed: | 100pcs/min |
| Feed Speed | 80m/min |
| Memory Number: | 1000PCS |
| Wire Feed Servo Motor: | 15 KW |
| Upper Cutter Servo Motor: | 3.8 KW |
| Bottom Cutter Servo Motor: | 3.8 KW |
| Pitch Servo Motor: | 2.7 KW |
| OD Servo Motor: | 2.7 KW |
| Power AC: | 3-Phase 220V |
| Dimensions (L*D*H): | 1600x1200X1900mm |
| Wooden Case Dimensions | 1800x1400x2100mm |
| Machine Weight: | 2500Kg |
| Gross Weights | 3000Kg |
Details:
Convenient mechanization,high speed and accuracy resulted from servo motion system.
1. XD-560 compression spring machine is a 5- axis spring machine consisting of wire feeding axis ,upper cutter axis, bottom cutter axis, pitch axis.
we ad d a spring OD controlling axis, all these axis assures to make most precise springs with most
efficiency.
2. The spring machine cutter can be adjusted inside and outside on computer easily and flexibly.thus
save manual work.
3. Servo motion system and servo drive controlled, 15" control panel, easy to operate
4. All necessary work relating to spring production can be accomplished by finger on computer panel.
5. Computer can automatically detect the temperature of the motor and slow down the running speed
to protect the motor from overheating.
6. Computer can automatically decelerate according to the timing when the probe should be used.
7. Production speed can be increased or decreased at any time running
5 Axis Compression Spring Machine With Wire Diameter 2.00 - 6.00mm
